MVN-SCC
Search
Phone: 0985 906 790
- 4-4-1, Đường số 3, KP. 5, P. Hiệp Bình Phước, TP. Thủ Đức, TP. HCM
- 0966999999
- cskh@icci.com.vn
- https://icci.com.vn
MVN-SCC
MVN-SCC is a new technology water reducing admixture for concrete with low viscosity and superior rheology.
MVN-SCC meets the requirements of TCVN 8826 and ASTM C494 type F&G, ASTM C1017
USES:
MVN-SCC is mainly suitable for the manufacture of concrete in precast factories and other in-situ precast concrete elements and also ready mixes concrete plant. MVN-SCC is used for the following types of concrete:
- Concrete with low viscosity and superior rheology
- Self-consolidating concrete, with superior pumping capacity
- High strength and high early strength
- Precast engineered concrete elements
- Slender components with dense reinforcement
-
Contact
-
465
CHARACTERISTICS – ADVANTAGES:
MVN-SCC combines different types of effects, such as electrostatic and steric effect. The polymer molecules adsorb onto the surface of fine particles, keeping them apart while hydration progresses, MVN-SCC effects the following concrete properties:
- Extremely high water reduction, high flowability without segregation
- Decreases the viscosity of the concrete while maintaining a constant W/C ratio
- Reduced porosity, permeability, optimal waterproofing capacity
- Improves surface appearance
- Workability can be maintained for a long time
- Enhanced creep and shrinkage resistance characteristics of concrete
APPLICATION INFORMATION
- Recommended dosage: 0.8 to 1.8 L per 100kg cement/ binder
- Typical dosage: 1.0 to 1.5 L per 100kg cement/ binder
- Overdosing will result in increased workability and setting time of the Concrete, however, provided that curing is effective, ultimate concrete strength and properties will not be affected
- Mixing, Placing and Handling: With the use of MVN-SCC, concrete of highest quality is being produced, however requires strict adherence to concrete technology processes such as mixing, placing, compacting and proper curing.
- Compatibility: MVN-SCC is compatible with most Portland cements. MVN-SCC is compatible with MVN-WPA (waterproofing admixture), Elkem microsilica (mineral admixture) and other MVN superplasticizers. Not compatible with Naphthalene-based agents.
TECHNICAL INFORMATION
MVN-SCC can be added directly to the pre-measured water and then added to the dry concrete mix or added separately to the wet concrete mix. To achieve the best effect of the admixture, the mixing time must be at least 60 seconds from the time the MVN-SCC mixture is added to the batch.
ECOLOGY, HEALTH AND SAFETY
- Toxicity: Non-toxic
- Protective measures: Avoid prolonged contact with skin. Wash off thoroughly with soap water.
- Transportation class: Non-hazardous
- Waste disposal: Do not dispose of into water or soil, comply with waste disposal regulations.
NOTE
The information and recommendations regarding product application are based on current knowledge and experience, assuming proper storage, handling, and application under normal conditions. However, due to variations in materials and actual site conditions, no warranty is provided regarding fitness for a specific purpose, nor can any legal liability be inferred from this information, written recommendations, or any other advice given. Users must independently test and evaluate the performance of product to ensure its suitability for their intended application and purpose
|
PRODUCT INFORMATION |
|
|
Aqueous mixture of modified Poly-carboxylates |
|
200 L, 1000 L |
|
Pale yellow liquid |
|
12 months from date of manufacture if stored properly, unopened |
|
Dry conditions, avoid direct sunlight, temperature not exceeding 30o C |
|
1.06 – 1.10 (at 25o C) |
|
4.0 – 6.0 |
