MVN-21ESM
Search
Phone: 0985 906 790
- 4-4-1, Đường số 3, KP. 5, P. Hiệp Bình Phước, TP. Thủ Đức, TP. HCM
- 0966999999
- cskh@icci.com.vn
- https://icci.com.vn
MVN-21ESM
MVN-21ESM is a new generation super plasticizer, improve early and final strength greatly while maintain concrete mixes’ workability.
Advantages
- Excellent water reducing and cement particle distribution characteristics;
- Improve early and final strength greatly;
- No segregation at high slump of concrete (self-compacting concrete);
- Excellent improvement of concrete’s durability and quality;
- Produce self-compacting concrete with low water/ cement ratio
- Improve concrete’s surface;
- Improve efficiency by shorten working stages and curing;
- Less problems of thermal crack, creep;
- Increase water proof ability.
Practical Uses
- Reinforce centrifugal concrete pillar (PC, PHC);
- Bridge girders and prestressed concrete structures;
- Cantilevered concrete structures;
- Prefabricate building component concrete with very high compression strength requirement.
-
Contact
-
722
Specification Type
Complies to the requirement of TCVN 8826:2011/ASTM C494 type F.
Advantages
- Excellent water reducing and cement particle distribution characteristics;
- Improve early and final strength greatly;
- No segregation at high slump of concrete (self-compacting concrete);
- Excellent improvement of concrete’s durability and quality;
- Produce self-compacting concrete with low water/ cement ratio
- Improve concrete’s surface;
- Improve efficiency by shorten working stages and curing;
- Less problems of thermal crack, creep;
- Increase water proof ability.
Practical Uses
- Reinforce centrifugal concrete pillar (PC, PHC);
- Bridge girders and prestressed concrete structures;
- Cantilevered concrete structures;
- Prefabricate building component concrete with very high compression strength requirement.
Suggested Uses
- Dosage rate: From 0,5 to 1,2 liter/ 100 kg adhesives. Typical dosage is from 0,8 to 1,0 liter/100kg adhesives
- Compatibility: Not compatible with admixture made from Naphthalene
- Cement: Suitable all Portland cement categories, Sulfate-resistance cement
- Quantitative: MVN-21ESM can be poured directly in to pre-determined water, then poured into dry concrete mixes or separately poured into mixed concrete (at station or mixer). It is better to poured directly into fresh concrete
- Overdose: When used excessively, it can increase the setting time of concrete
- Note: It is necessary to conduct pre-mix testing according to materials, cement, aggregates and actual site conditions to select the optimal dosage for each specific required item. If you need help, please contact ICCI technical department for further instructions
Safety information
- Ecology: Do not pour into water resource
- Destroy: Comply to current laws
- Explosion: No explosion
- Protection measures: Avoid contact with food and household appliances. Avoid long contact with skin. In case it came in contact, use water to wash with care. If it came in contact with eyes and mouth need to wash with clean water and immediately see doctor
General Properties
- Appearance : Light yellow liquid
- Chemical Composition : Polycarboxylate mixture
- Specific Gravity : 1,06 ~ 1,10 ( at 25oC)
- pH : 5,0 ~ 7,0
- Package : 200 liter; 1.000 liter
- Chlorine Content : Negligible
- Storage : Dry, cool, shade area, protected from direct sunlight
- Expiry date : 12 months from the production date if stored properly (unopened drums/ container).
Product Similar
