MVN-300LSC
Search
Phone: 0985 906 790
- 4-4-1, Đường số 3, KP. 5, P. Hiệp Bình Phước, TP. Thủ Đức, TP. HCM
- 0966999999
- cskh@icci.com.vn
- https://icci.com.vn
MVN-300LSC
DESCRIPTION:
MVN-300LSC is a new technology water reducing admixture for concrete with low viscosity and superior rheology.
MVN-300LSC meets the requirements of TCVN 8826 and ASTM C494 type F&G, ASTM C1017
USES:
MVN-300LSC is mainly suitable for the manufacture of concrete in precast factories and other in-situ precast concrete elements and also ready mixes concrete plant. MVN-300LSC is used for the following types of concrete:
- Concrete with low viscosity and superior rheology
- Self-consolidating concrete, with superior pumping capacity
- High strength and high early strength
- Precast engineered concrete elements
- Slender components with dense reinforcement
-
Contact
-
668
ADVANTAGES:
MVN-300LSC combines different types of effects, such as electrostatic and steric effect. The polymer molecules adsorb onto the surface of fine particles, keeping them apart while hydration progresses, MVN 300LSC effects the following concrete properties:
- Extremely high water reduction, high flowability without segregation
- Decreases the viscosity of the concrete while maintaining a constant W/C ratio
- Reduced porosity, permeability, optimal waterproofing capacity
- Improves surface appearance
- Workability can be maintained for a long time
- Enhanced creep and shrinkage resistance characteristics of concrete
APPLICATION INFORMATION
Recommended dosage: 0.8 to 1.8 L per 100kg cement/ binder
Typical dosage: 1.0 to 1.5 L per 100kg cement/ binder
Overdosing will result in increased workability and setting time of the Concrete, however, provided that curing is effective, ultimate concrete strength and properties will not be affected
TECHNICAL INFORMATION
MVN-300LSC can be added directly to the pre-measured water and then added to the dry concrete mix or added separately to the wet concrete mix. To achieve the best effect of the admixture, the mixing time must be at least 60 seconds from the time the MVN-300LSC mixture is added to the batch.
Mixing, Placing and Handling: With the use of MVN-300LSC, concrete of highest quality is being produced, however requires strict adherence to concrete technology processes such as mixing, placing, compacting and proper curing.
Compatibility: MVN-300LSC is compatible with most Portland cements. MVN-300LSC is compatible with MVN-WPA (waterproofing admixture), Elkem microsilica (mineral admixture) and other MVN superplasticizers. Not compatible with Naphthalene-based agents.
ECOLOGY, HEALTH AND SAFETY
Toxicity: Non-toxic
Transportation class: Non-hazardous
Protective measures: Avoid prolonged contact with skin. Wash off thoroughly with soap water.
Waste disposal: Do not dispose of into water or soil, comply with waste disposal regulations.
Refer to the product Safety Data Sheet (SDS) for more information on safe use, storage and disposal of chemical products.
LEGAL NOTES
The information and recommendations regarding product application are based on current knowledge and experience, assuming proper storage, handling, and application under normal conditions. However, due to variations in materials and actual site conditions, no warranty is provided regarding fitness for a specific purpose, nor can any legal liability be inferred from this information, written recommendations, or any other advice given. Users must independently test and evaluate the performance of product to ensure its suitability for their intended application and purpose.
PRODUCT INFORMATION:
- Chemical base: Aqueous mixture of modified Poly-carboxylates
- Packaging: 200 L, 1000 L
- Appearance/ Color: Pale yellow liquid
- Shelf life: 12 months from date of manufacture if stored properly, unopened
- Storage conditions: Dry conditions, avoid direct sunlight, temperature not exceeding 30oC
- Density: 1.05 – 1.09 (at 25oC)
- pH: 3.5 – 5.5
Product Similar
