MVN-350S

Suggested Uses:

• Dosage rate: From 0,6 to 1,2 liter/ 100 kg adhesives. Typical dosage is  from 0,8 to 1,0 liter/100kg adhesives
• Compatibility: Not compatible with admixture made from Naphthalene
• Cement: Suitable all Portland cement categories, Sulfate-resistance cement
• Quantitative: MVN-350S can be poured directly in to pre-determined water, then poured into dry concrete mixes or separately poured into mixed concrete (at batching plant or trust at site)
• Overdose: When used in excess, concrete can stratify, separate water and prolong setting time, however, if properly maintained, the ultimate strength and properties of concrete will not be affected.
• Note: It is necessary to conduct pre-mix testing according to materials, cement, aggregates and actual site conditions to select the optimal dosage for each specific required item. If you need help, please contact ICCI technical department for further instructions.

Safety information

• Ecology: Do not pour into water resource
• Destroy: Comply to current laws
• Explosion: No explosion
• Protection measures: Avoid contact with food and household appliances. Avoid long contact with skin. In case it came in contact, use water to wash with care. If it came  in contact with eyes and mouth need to wash with clean water and immediately see doctor.

General Properties

• Appearance                       :  Light yellow liquid
• Chemical Composition     :  Polycarboxylate mixture
• Specific Gravity                :  1,07 ± 0,02 ( at 25^oC)
• pH                                      :  5,0 ± 1,0    
• Package                             :  200 liter; 1.000 liter
• Chlorine Content               :  Negligible
• Storage                               :  Dry, cool, shade area, protected from direct sunlight
• Expiry date                           : 12 months from the production date if stored properly (unopened drums/ container).