MVN-CA

Suggested Uses

• Surface preparation: The concrete surface must be free from blemishes, dust, and pollutants. It must be dry and free of standing water
• Construction:

Stir the product thoroughly before use

MVN-CA được sử dụng ngay không cần pha loãng thêm

Spray MVN-CA maintenance film on the newly poured concrete surface when the water on the surface has just evaporated (in about 30 minutes to 2 hours depending on temperature). Spray a thin film of MVN-CA on the entire concrete surface using a handheld sprayer or low pressure sprayer. For dry or non-slumping concrete mixtures, apply immediately after completing the finishing work

Protect from rain or direct water on product surface for at least 2-3 hours

Avoid construction at temperatures below 0^oC

• Coverage density: From 5-7m2/liter
• Cleaning: Tools are washed with water after construction, or use solvent when hardened.

Safety information

• Ecology: Do not pour into water resource
• Destroy: Comply to current laws
• Explosion: No explosion
• Protection measures: Avoid contact with food and household appliances. Avoid long contact with skin. In case it came in contact, use water to wash with care. If it came  in contact with eyes and mouth need to wash with clean water and immediately see doctor.

General Properties

• Appearance                       :  Ivory white liquid
• Chemical Composition     :  Faraffin emulsion
• Specific Gravity                :  0,98 ± 0,02 ( at 25oC)
• pH                                      :  7,0 ~ 9,0    
• Package                             :  200 liter; 1.000 liter
• Chlorine Content               :  Negligible
• Storage                              :  Dry, cool, shade area, protected from direct sunlight
• Expiry date                         : 04 months from the production date if stored properly (unopened drums/ container).