Mighty 3000-HS

Suggested Uses

• Dosage rate: From 0.6 to 1.6 liters per 100 kg of binder. Typical dosage ranges from 1.0 to 1.4 liters per 100 kg of binder.

• Compatibility: Not compatible with admixtures based on Naphthalene.

• Cement: Suitable for all types of Portland cement and sulfate-resistant cement.

• Quantitative: Mighty 3000-HS can be added directly to the pre-measured water before mixing with dry concrete materials, or added separately into already mixed concrete (either at the batching plant or in the transit mixer at the construction site).

• Overdose: Excessive dosage may cause segregation, bleeding, and extended setting time; however, with proper curing, final strength and concrete properties will not be affected.

• Note: Preliminary trials should be conducted for each mix design based on the actual materials, cement, aggregates, and site conditions to determine the optimal dosage for each specific application. For assistance, please contact ICCI technical department for further guidance.

Safety Information

• Ecology: Do not dispose into water sources.

• Destroy: Follow current regulations.

• Explosion: Non-flammable, non-explosive.

• Protective measures: Avoid contact with food and household items. Avoid prolonged skin contact. In case of contamination, wash thoroughly with water. If contact occurs with eyes or mouth, rinse with clean water and seek medical attention immediately.

Product Information

• Appearance: Liquid, light yellow color

• Chemical Composition: Polycarboxylate blend

• Specific Gravity: 1.06 ~ 1.10 (at 25°C)

• pH: 4.5 ~ 6.5

• Packaging: 200 liters; 1,000 liters

• Chloride Content: Negligible

• Storage: Store in a cool, shaded place, avoid direct sunlight exposure

• Expiry date: 12 months from the date of manufacture when stored properly (sealed drums/containers)